Diatomic molecules are molecules composed only of two atoms, of either the same or different chemical elements. The prefix di- means two in Greek. Common diatomic molecules are hydrogen, nitrogen, oxygen, and carbon monoxide. Most elements aside from the noble gases form diatomic molecules when heated, but high temperatures—sometimes thousands of kelvins—are often required.

Occurrence Edit

Hundreds of diatomic molecules have been characterized.[1], in our terrestrial environment, in the laboratory, and in the interstellar medium (see List of molecules in interstellar space). About 99% of the Earth's atmosphere is composed of diatomic molecules, specifically oxygen and nitrogen at 21 and 78%, respectively. The natural abundance of hydrogen (H2) in the Earth's atmosphere is only on the order of parts per million, but H2 is, in fact, the most abundant diatomic molecule seen in nature. The interstellar medium is, indeed, dominated by hydrogen atoms.

Elements that consist of diatomic molecules, under typical laboratory conditions of 1 bar and 25 °C, include hydrogen (H2), nitrogen (N2), oxygen (O2), and the halogens. Relative to the other halogens (fluorine, chlorine, bromine, and iodine), astatine is so rare, with its most stable isotope having a half-life of only 8.3 hours, that it is usually not considered.[2] Again, many other diatomics are possible and form when elements are heated to their gaseous states, but these diatomic species repolymerize at lower temperatures. For example, heating ("cracking") elemental phosphorus gives diphosphorus.

In most diatomic molecules, the elements are nonidentical. Prominent examples include carbon monoxide, nitric oxide, and hydrogen chloride.

If a diatomic molecule consists of two atoms of the same element, such as H2 and O2, then it is said to be homonuclear, but otherwise it is heteronuclear, such as with CO or NO. The bond in a homonuclear diatomic molecule is non-polar and covalent.

Molecular GeometryEdit

Diatomic molecules can not have any geometry but linear, as any two points always lie in a line. This is the simplest spatial arrangement of atoms, second only to the sphericity of single atoms.[3].

Historical significance Edit

Diatomic elements played an important role in the elucidation of the concepts of element, atom, and molecule in the 19th century, because some of the most common elements, such as hydrogen, oxygen, and nitrogen, occur as diatomic molecules. John Dalton's original atomic hypothesis assumed that all elements were monatomic and that the atoms in compounds would normally have the simplest atomic ratios with respect to one another. For example, Dalton assumed that water's formula was HO, giving the atomic weight of oxygen as 8 times that of hydrogen, instead of the modern value of about 16. As a consequence, confusion existed regarding atomic weights and molecular formulas for about half a century.

As early as 1805, Gay-Lussac and von Humboldt showed that water is formed of two volumes of hydrogen and one volume of oxygen, and by 1811 Amedeo Avogadro had arrived at the correct interpretation of water's composition, based on what is now called Avogadro's law and the assumption of diatomic elemental molecules. However, these results were mostly ignored until 1860. Part of this rejection was due to the belief that atoms of one element would have no chemical affinity towards atoms of the same element, and part was due to apparent exceptions to Avogadro's law that were not explained until later in terms of dissociating molecules.

At the 1860 Karlsruhe Congress on atomic weights, Cannizzaro resurrected Avogadro's ideas and used them to produce a consistent table of atomic weights, which mostly agree with modern values. These weights were an important pre-requisite for the discovery of the periodic law by Dmitri Mendeleev and Lothar Meyer.[4]

Energy levels Edit

It is convenient, and common, to represent a diatomic molecule as two point masses (the two atoms) connected by a massless spring. The energies involved in the various motions of the molecule can then be broken down into three categories.

  • The translational energies
  • The rotational energies
  • The vibrational energies

Translational energiesEdit

The translational energy of the molecule is simply given by the kinetic energy expression:

$ E_{trans}=\frac{1}{2}mv^2 $

where m is the mass of the molecule and v is its velocity.

Rotational energiesEdit

Classically, the kinetic energy of rotation is

$ E_{rot} = \frac{L^2}{2 I} \, $
$ L \, $ is the angular momentum
$ I \, $ is the moment of inertia of the molecule

For microscopic, atomic-level systems like a molecule, angular momentum can only have specific discrete values given by

$ L^2 = l(l+1) \hbar^2 \, $
where l is a positive integer and $ \hbar $ is Planck's reduced constant.

Also, for a diatomic molecule the moment of inertia is

$ I = \mu r_{0}^2 \, $
$ \mu \, $ is the reduced mass of the molecule and
$ r_{0} \, $ is the average distance between the two atoms in the molecule.

So, substituting the angular momentum and moment of inertia into Erot, the rotational energy levels of a diatomic molecule are given by:

$ E_{rot} = \frac{l(l+1) \hbar^2}{2 \mu r_{0}^2} \ \ \ \ \ l=0,1,2,... \, $</div>

Vibrational energiesEdit

Another way a diatomic molecule can move is to have each atom oscillate - or vibrate - along a line (the bond) connecting the two atoms. The vibrational energy is approximately that of a quantum harmonic oscillator:

$ E_{vib} = \left(n+\frac{1}{2} \right)hf \ \ \ \ \ n=0,1,2,.... \, $
n is an integer
h is Planck's constant and
f is the frequency of the vibration.

Comparison between rotational and vibrational energy spacingsEdit

The lowest rotational energy level of a diatomic molecule occurs for $ l=0 $ and gives Erot = 0. For O2, the next highest quantum level ($ l=1 $) has an energy of roughly:

$ E_{rot,1} \, $ $ = \frac{\hbar^2}{2 m_{O_{2}} r_{0}^2} \, $
$ \approx \frac{\left(1.05 \times 10^{-34} \ \mathrm{J\cdot s} \right)^2}{2 \left(27 \times 10^{-27} \ \mathrm{kg} \right) \left(10^{-10} \ \mathrm{m} \right)^2} \, $
$ \approx 2 \times 10^{-23} \ \mathrm{J}. \, $

This spacing between the lowest two rotational energy levels of O2 is comparable to that of a photon in the microwave region of the electromagnetic spectrum.

The lowest vibrational energy level occurs for $ n=0 $, and a typical vibration frequency is 5 x 1013 Hz. Doing a calculation similar to that above gives:

$ E_{vib,0} \approx 3 \times 10^{-21} \ \mathrm{J}. \, $

So the spacing, and the energy of a typical spectroscopic transition, between vibrational energy levels is about 100 times greater than that of a typical transition between rotational energy levels.

Further reading Edit

  • Huber, K. P. and Herzberg, G. (1979). Molecular Spectra and Molecular Structure IV. Constants of Diatomic Molecules, New York: Van Nostrand: Reinhold. 
  • Tipler, Paul (1998). Physics For Scientists and Engineers : Vol. 1 (4th ed.), W. H. Freeman. ISBN 1-57259-491-8. 

See also Edit

Notes and references Edit

  1. Huber, K. P. and Herzberg, G. (1979). Molecular Spectra and Molecular Structure IV. Constants of Diatomic Molecules, New York: Van Nostrand: Reinhold. 
  2. Emsley, J. (1989). The Elements, Oxford: Clarendon Press. pp. 22–23. 
  3. "VSEPR - A Summary". University of Berkeley College of Chemistry. 20 Jan 2008.
  4. Ihde, Aaron J. (1961). "The Karlsruhe Congress: A centennial retrospective.". Journal of Chemical Education 38: 83–86, Retrieved on 24 August 2007. 

External links Edit

  • Hyperphysics - Rotational Spectra of Rigid Rotor Molecules
  • Hyperphysics - Quantum Harmonic Oscillator
  • 3D Chem - Chemistry, Structures, and 3D Molecules
  • IUMSC - Indiana University Molecular Structure Center

Template:MolecularGeometry Template:Diatomicelementsar:ثنائي الذرة ca:Molècula diatòmicaid:Molekul diatomik it:Biatomico ml:ദ്വയാണുതന്മാത്രsimple:Diatomic molecules